Newer
Older
[Buildkit](https://github.com/civicrm/civicrm-buildkit) is a collection of ~20 tools for developing and testing CiviCRM, the most important of which is [civibuild](/tools/civibuild.md).
Many of these tools are commonly used by web developers, so you may have already installed a few. Even so, it's generally easier to install the full collection — installing each individually takes a lot of work.
This is the same collection of tools which manages the test/demo/release infrastructure for civicrm.org.
## Supported Operating Systems
Currently BuildKit includes [specific, tested install steps](https://github.com/civicrm/civicrm-buildkit/blob/e278123c2a5edb525a01c816283d30b882aa8fab/bin/civi-download-tools#L329) for the following Ubuntu and Debian operating system releases - note that recently removed versions are shown in this list for information and are marked in the final column.
Version | Codename | Release Date | EoL Date | Buildkit Removal |
--------- | ------------ | -------------- | ---------- | ------------------------- |
19.04 | Disco Dingo | April 2019 | January 2020 | June 2020 |
18.10 | Cosmic Cuttlefish | October 2018 | July 2019 <sup>🔴</sup> | January 2020 |
18.04 | Bionic Beaver | April 2018 | April 2023 | October 2023 |
17.10 | Artful Aardvark | October 2017 | July 2018 <sup>🔴</sup> | January 2019 <sup>✅</sup> |
17.04 | Zesty Zapus<sup>*</sup> | April 2017 | January 2018 <sup>🔴</sup> | July 2018 <sup>✅</sup> |
16.10 | Yakkety Yak<sup>*</sup> | October 2016 | July 2017 <sup>🔴</sup> | January 2018 <sup>✅</sup> |
16.04 | Xenial Xerus | April 2016 | April 2021 | October 2021 |
14.04 | Trusty Tahr | April 2014 | April 2019 <sup>🔴</sup> | October 2019 <sup>✅</sup> |
12.04 | Precise Pangolin | April 2012 | April 2017 <sup>🔴</sup> | October 2017 <sup> ✅</sup> |
<sup>*</sup> = Reuses installation steps for Xenial Xerus.
<sup>🔴</sup> = Is currently EoL.
<sup>✅</sup> = Has been removed from BuildKit
Version | Codename | Release Date | EoL Date | BuildKit Removal |
--------- | ------------ | -------------- | ---------- | ------------------ |
10 | Buster | July 2019 | 202x | Unknown |
9 | Stretch | June 2017 | 2022 | Unknown |
8 | Jessie | April 2015 | June 2020 | September 2020 |
!!! warning
Our current policy is that these specific install steps will be removed from BuildKit when they reach their End Of Life (EoL) date plus 6 months. See [this issue](https://github.com/civicrm/civicrm-buildkit/issues/432) for discussion/information.
If you have a new installation of:
* Ubuntu 16.04 or later.
* Debian 8 or later.
You can download everything, buildkit and the system requirements with one command. [`curl`](https://curl.haxx.se/) is required to be installed before you can run the command. You can install `curl` with `sudo apt install curl`. The below command will install buildkit to `~/buildkit`:
```bash
curl -Ls https://civicrm.org/get-buildkit.sh | bash -s -- --full --dir ~/buildkit
```
* When executing the above curl/install command, you should *not* run it as `root` - including via `sudo`, as doing so *will* cause failures. However, you *should* have `sudo` permissions as the script includes several `sudo` statements where these are required.
* The `--full` option is *very opinionated*; it specifically installs `php`, `apache`, and `mysql` (rather than `hhvm`, `nginx`, `lighttpd`, or `percona`). If you try to mix `--full` with alternative systems, then expect conflicts.
* If you use the Ubuntu feature for "encrypted home directories", then don't put buildkit in `~/buildkit`. Consider `/opt/buildkit`, `/srv/buildkit`, or some other location that remains available during reboot.
homotechsual
committed
After running the above command, then proceed to the [post-installation configuration](#config).
### Vagrant
[Full Download: Vagrantbox](https://github.com/civicrm/civicrm-buildkit-vagrant) - Download a prepared virtual-machine with all system dependencies (mysql, etc). This is ideal if you work on Windows or OS X.
### Docker
If you have [Docker](https://www.docker.com/) running, you can use one of the following projects to run buildkit within a Docker container:
* <https://github.com/michaelmcandrew/civicrm-buildkit-docker>
* <https://github.com/progressivetech/docker-civicrm-buildkit>
* <https://github.com/ErichBSchulz/dcbk>
There are different versions of Buildkit on Docker. Michael McAndrew's seems to be the easiest to get started with on Linux.
#### Install buildkit on docker on ubuntu
Follow the official installation instructions from https://docs.docker.com/compose/install/ to install docker compose on your linux machine.
```bash
git clone https://github.com/michaelmcandrew/civicrm-buildkit-docker.git
cd civicrm-buildkit-docker
sudo docker-compose up -d
```
Now you are ready to go.
To create a new site with buildkit run the following command:
```bash
docker-compose exec -u buildkit civicrm civibuild create dmaster --url http://localhost:8080
```
Alternative you can login into the conatiner and run the commands from there:
```bash
docker-compose exec -u buildkit civicrm bash
```
More information is in the Readme: https://github.com/michaelmcandrew/civicrm-buildkit-docker/blob/master/README.md
### Other platforms
You may install buildkit in other environments. The main pre-requisites are:
* Linux or OS X
* Git
* PHP 5.6+ (7.2+ recommended), including the following extensions: `bcmath curl gd gettext imap intl imagick json mbstring openssl pdo_mysql phar posix soap zip`
* NodeJS 8+
[amp](https://github.com/totten/amp) and [civibuild](/tools/civibuild.md) also require:
* Apache 2.2 or 2.4, including the `mod_rewrite` module and, on SUSE, possibly `mod_access_compat` (This list may not be exhaustive.)
* MySQL 5.5+ (5.7+ recommended), including both client and server
All pre-requisites must support command-line access using the standard command names (`git`, `php`, `node`, `mysql`, `mysqldump`, etc). In some environments, you may need to enable these commands by configuring `PATH` -- this is especially true for MAMP, XAMPP, and other downloaded packages. (See, e.g., [Setup Command-Line PHP](/standards/php.md).)
Once the pre-requisites are met, download buildkit to `~/buildkit`:
```bash
$ git clone https://github.com/civicrm/civicrm-buildkit.git ~/buildkit
$ cd ~/buildkit
$ ./bin/civi-download-tools
### Configuring your path {:#path}
!!! note "Not needed for Vagrant/Docker installations"
If you set up buildkit using Vagrant or Docker, then you don't need to perform the configuration steps listed here.
Buildkit includes many CLI commands in the `bin/` folder.
You may execute the commands directly (e.g. `./bin/civix` or `/path/to/buildkit/bin/civix`). However, this would become very cumbersome. Instead, you should configure the shell's `PATH` to recognize these commands automatically.
!!! tip
Throughout this document, we will provide examples which assume that buildkit was downloaded to `/path/to/buildkit`. Be sure to adjust the examples to match your system.
If you want to ensure that the buildkit CLI tools are always available, then:
1. Determine the location of your shell configuration file. This is usually `~/.bash_profile`, or `~/.profile`. You may have to create one.
1. At the end of the file, add `PATH="/path/to/buildkit/bin:$PATH"`.
homotechsual
committed
1. If you are on a mac, you can close and re-open your terminal. On other systems, you will need to log-out or source your `~/.profile` with `source ~/.profile`.
1. Enter the command `civibuild -h`. This should display a help screen for civibuild. If you get 'command not found', then check your path and retry the steps above.
homotechsual
committed
!!! tip
For most installations with the standard buildkit install script the following lines in your shell configuration file will work.
``` bash
# Add ~/buildkit/bin to path if it exists.
if [ -d "$HOME/buildkit/bin" ] ; then
PATH="$HOME/buildkit/bin:$PATH"
fi
```
On most OS's `~/.profile` is run only once when you login to your desktop. There is a distinction between "login shells" and "non-login shells" which you don't really need to worry about, except that the distinction is the reason that you should set your `$PATH` in your `~/.profile` and not your `~/.bashrc`.
homotechsual
committed
When you open a terminal (non-login), `~/.bashrc` will be executed. The common idiom for changing the path is to add to the `$PATH`, not rebuild it, so if you update your `$PATH` every time a shell is invoked, your `$PATH` will continually grow. This is not really a problem, but you might want to be aware of this.
homotechsual
committed
If you are on a mac, the situation is reversed. That is, your `$PATH` is not set when you login into your desktop and every terminal you open is a "login shell" and `~/.profile` will be executed every time.
homotechsual
committed
You do not need to run `export PATH=...` because your system certainly has already exported the `$PATH` variable and you only need to update it.
homotechsual
committed
References:
* <https://unix.stackexchange.com/a/26059>
* <https://superuser.com/questions/244964/mac-os-x-bashrc-not-working#244990>
* <https://askubuntu.com/questions/155865/what-are-login-and-non-login-shells#156038>
Buildkit includes specific versions of some fairly popular tools (such as `drush`, `phpunit`, and `wp-cli`), and it's possible that you have already installed other versions of these tools.
By design, buildkit can coexist with other tools, but you must manually manage the `PATH`.
Whenever you wish to use buildkit, manually run a command like, e.g.:
```bash
export PATH=/path/to/buildkit/bin:$PATH
```
To restore your normal `PATH`, simply close the terminal and open a new one.
Each time you open a new terminal while working on Civi development, you would need to re-run the `export` command.
### Configuring `amp` {:#amp-config}
homotechsual
committed
Buildkit provides a tool called `amp` which [civibuild](/tools/civibuild.md) uses when it needs to set up a new site. Before you can use `civibuild`, need to configure `amp` by telling it a bit about your system (e.g. what webserver you're using).
homotechsual
committed
!!! tip "tips"
* Run this as a non-`root` user who has `sudo` permission. This will ensure that new files are owned by a regular user, and (if necessary) it enables `civibuild` to restart your webserver and edit `/etc/hosts`.
* Pay close attention to any instructions given in the output of this command.
* To check which version of apache you have, run `apachectl -v`.
homotechsual
committed
homotechsual
committed
We strongly recommend using Apache as your webserver because support for nginx is limited.
1. Test amp's configuration
```
$ amp test
```
homotechsual
committed
The test is successful if you see `Received expected response` at the end.
homotechsual
committed
If the test produces any errors, you might try re-running the above config steps and/or asking for help in the [developer chat room](https://chat.civicrm.org/civicrm/channels/dev).
1. After `amp` is configured, you can move on to running [civibuild](/tools/civibuild.md) to build a local development installation of CiviCRM.
## Troubleshooting {:#troubleshooting}
Seamus Lee
committed
### Node JS issues
: Download the latest version from nodejs.org and follow their instructions
Nodejs problems
: It might be handy to run
```bash
npm update
npm install fs-extra
```
Seamus Lee
committed
### Website login issues
Seamus Lee
committed
If you find that when you try and login to a new buildkit build or similar and it doesn't seem to login just redirects to the same page. This may mean that the rewrite module for apache is not enabled. To enable it do the following
```bash
sudo a2enmod rewrite
```
Seamus Lee
committed
After enabling the rewite module you will need to restart apache.
New versions of buildkit are likely to include new versions of tools. The new tools will download automatically when you first run `civibuild`. If you prefer to download explicitly, then re-run `civi-download-tools`.
The configurations and tools in buildkit are periodically updated. To get the latest, simply run:
```bash
cd ~/buildkit
git pull
./bin/civi-download-tools
```
See the [buildkit changelog](https://github.com/civicrm/civicrm-buildkit/blob/master/CHANGELOG.md) for info about specific changes to buildkit.
!!! tip "When upgrading `civix`, check upgrade instructions."
If you see an upgrade to `civix` in the changelog, and if you maintain extensions with `civix`,
then check the general [civix upgrade documentation](/extensions/civix.md#upgrade-templates) and [UPGRADE.md](https://github.com/totten/civix/blob/master/UPGRADE.md).